IP-1 Interactive Pen for IW2 Interactive Whiteboard System

IS-01 Interactive Whiteboard System

Model Number: 5-866-1-08-00
$149.00
Buy Now

Draw, Annotate, Interact, Inspire

No whiteboard? No problem. The IPEVO Interactive Whiteboard System, or IS-01, transforms most any flat surface into an interactive whiteboard. Pair IS-01 with a computer and projector – even portable or short-throw projectors – and in just a few simple steps you can draw and annotate on a projected "board" large enough for the entire class – up to 100"!

*Computer and Projector not included.

IS-01 is made up of two devices: the Sensor Cam and the Interactive Pen

IS-01 is made up of two devices: the Sensor Cam and the Interactive Pen. The Sensor Cam detects the physical location of the Pen and sends this information to your computer, which then translates the Pen’s motion into cursor motion. Cursor movements, mouse clicks, and mouse drags can all be accomplished in real time, meaning you’ll be able to control what’s on screen, just as if you were at the computer.

Watch Video

The Sensor Cam detects the physical location of the Pen and sends this information to your computer, which then translates the Pen’s motion into cursor motion.

Annotate with IPEVO Annotator

The free IPEVO Annotator software can be used in combination with a wide variety of other applications. Draw, write and annotate onto images on the screen in real time using an intuitive drawing toolkit. Or, create a blank whiteboard to turn your projector screen into a true interactive whiteboard.

Drawing and Annotating

Drawing and Annotating

Image Caputre

Image Caputre

Screen Recording

Screen Recording

IS-01 is small enough to be transported between classrooms or even slipped into a pencil case for remote presentations. Introducing IS-01 into a new environment is a breeze, and a new setup can be accomplished in minutes. The Sensor Cam has a wide range of acceptable distances and can be affixed directly to ceiling-mounted projectors or set on tables or AV carts.

For ceiling-mounted projectors, affix the Sensor Cam directly to the projector.

For ceiling-mounted projectors, affix the Sensor Cam directly to the projector.

For short-throw projectors, just place the Sensor Cam on a table or AV cart.

For short-throw projectors, just place the Sensor Cam on a table or AV cart.

Competing interactive whiteboards can cost a small fortune! Save money and create dynamic new ways to learn with the IS-01 Interactive Whiteboard System.

Please note: Computer and projector are not included in the package. You need to have an existing computer and projector to pair with the IS-01.

*IS-01 product page is also available in Lithuanian (transl. by Giedrius Sadauskas).

Frequently Asked Questions

  • Traditional interactive whiteboards can cost thousands of dollars. How do you sell IS-01 at such a low price?

    Most traditional interactive whiteboards use resistive or capacitive touch panels, which is the main reason why their cost cannot be lowered. The size and weight of the board also increases the freight (shipping) cost. As a result, these boards can cost thousands of dollars. By contrast, IS-01 is designed around infrared (IR), an inexpensive technology. A Sensor Cam, connected to the computer and directed toward the screen, captures IR signals sent out by the Interactive Pen. These signals are converted into coordinates which control the mouse cursor. With this innovative use of IR, IS-01 doesn't need a costly touch panel. Thus, we are able to manufacture IS-01 at an affordable price.

  • What are the limitations of IS-01 compare to the expensive traditional interactive whiteboards?

    • Some expensive interactive whiteboards can be operated with fingers and other materials, while IS-01 only works with its Interactive Pen.
    • The Interactive Pen must remain within view of the Sensor Cam to work. The user (or viewers) cannot block the area between the Sensor Cam and the Pen with their body. This limitation does not apply to most traditional interactive whiteboards.
    • IS-01 does not support multi-touch functions. Only 1 Interactive Pen can be used at a time. Some traditional interactive whiteboards do support multi-touch.

    Please take these facts into consideration before making your purchase. Carefully weighing the benefits and limitations of IS-01 will help you decide which whiteboard setup is the right one for your needs.

  • Can I use IS-01 with a TV or monitor instead of a projector?

    Yes you can, but we do not recommend it due to the following considerations:

    • The TV/monitor screen could be scratched over time from all the Pen swipes.
    • The brightness of the TV/monitor can cause eye fatigue over long sessions.
    • If the TV/monitor is not firmly mounted, it might move once you start tapping, throwing off the calibration.
  • Can I use IS-01 with an IPEVO document camera?

    Yes, IS-01 can be used with IPEVO document cameras. Annotator has a button to launch Presenter software which displays real-time video from your doc cam. Documents, textbooks, artwork, 3D objects, handwritten notes, math equations, or anything else can be presented for sharing and annotating.

  • My classroom is only equipped with a soft projector screen. Is IS-01 going to work?

    A soft projector screen is not recommended for use with IS-01 because the surface will move, which may affect Interactive Pen accuracy. When the Interactive Pen is pressed against the surface of the soft projector screen, the screen is likely to move. As a result, the Sensor Cam may capture the Interactive Pen at an incorrect location, resulting in an inaccurate cursor. With that said, if you are able to keep the screen steady or flat against the wall, pressing the IPEVO button on the Interactive Pen instead of directly touching the screen surface could still work for you.

  • What software is compatible with IS-01?

    IS-01 can be used with any image processing software and whiteboards. Any mouse-based software should work fine. Please note that IS-01 also comes with an interactive whiteboard software called Annotator which features virtual whiteboards, drawing tools such as shapes and colors, and integration with IPEVO doc cams and Presenter software. Annotator can also be used in combination with any other application.

  • What if I order two sets of IS-01? Can I use two Interactive Pens at the same time?

    IS-01 does not support multi-touch functions. Only one Interactive Pen will be captured at a time, regardless of the number of activated Interactive Pens. However, if you have two sets of computers and projectors running side by side, two IS-01s may be used separately.

  • What kind of projector is recommended for use with IS-01?

    IS-01 doesn't connect directly to your projector—it connects to your computer. Therefore, any projector that is compatible with your computer before adding IS-01 to your setup should display and calibrate without issue after connecting IS-01.

  • Does IS-01 support extended screen display?

    Extended screen display is only supported if you are using a Mac. Unfortunately, if you are using Windows, there is no way that our IS-01 could support extended screen display, not even with any third party application. It will only work in mirror mode.

  • Can I use USB extension cable if my computer is too far away from where IS-01 Sensor Cam needs to be?

    We have USB 2.0 Extension Cable (16 Feet) and USB 2.0 Active Extension Cable (32 Feet), they are both tested compatible with IS-01. USB 2.0 Extension Cable (16 Feet) and IS-01 combination is known incompatible with Macbooks manufactured after 2013. If you have such Macbooks, please select the USB 2.0 Active Extension Cable (32 Feet) instead.